High Quality Rectangular Steel Tubing Prices From HengHui Steel

15 chromium molybdenum alloy steel plate 15CrMo hot rolled coil

15CrMo steel is a pearlitic heat-resistant steel with high thermal strength (δb≥440MPa) and oxidation resistance at high temperatures, and has a certain ability to resist hydrogen corrosion. Due to the high content of Cr, C and other alloying elements in the steel, the hardening tendency of the steel is obvious, and the weldability is poor.








Product Name
Standard
Specification




Hot Rolled Coil
15CrMo
2.85*1500*C


Hot Rolled Coil
15CrMo
3.85*1500*C


Hot Rolled Coil
15CrMo
4.85*1500*C


Hot Rolled Coil
15CrMo
5.85*1500*C


Hot Rolled Coil
15CrMo
7.85*1500*C


Hot Rolled Coil
15CrMo
9.85*1500*C


Hot Rolled Coil
15CrMo
11.85*1500*C


Hot Rolled Plate
15CrMo
3*1500*3000


Hot Rolled Plate
15CrMo
3*1500*6000


Hot Rolled Plate
15CrMo
4*1500*3000


Hot Rolled Plate
15CrMo
4*1500*6000


Hot Rolled Plate
15CrMo
5*1500*3000


Hot Rolled Plate
15CrMo
5*1500*6000


Hot Rolled Plate
15CrMo
6*1500*3000


Hot Rolled Plate
15CrMo
6*1500*6000


Hot Rolled Plate
15CrMo
8*1500*3000


Hot Rolled Plate
15CrMo
8*1500*6000


Hot Rolled Plate
15CrMo
10*1500*3000


Hot Rolled Plate
15CrMo
10*1500*6000


Hot Rolled Plate
15CrMo
12*1500*3000


Hot Rolled Plate
15CrMo
12*1500*6000



Chemical Properties






15CrMo has high thermal strength (δb≥440MPa) and oxidation resistance at high temperatures, and has a certain ability to resist hydrogen corrosion. Due to the high content of Cr, C and other alloying elements in the steel, the hardening tendency of the steel is obvious, and the weldability is poor.



15crmo Mechanical properties: Tensile strength: ≥440mpa Yield strength: ≥295mpa Elongation after fracture: ≥22% section shrinkage: ≥60% Impact work: ≥94J



15CrMo is mainly used in internal combustion engine crankshaft, gear, camshaft and important gear reducer parts.

Key Considerations for Using Galvanized Steel Pipes
Galvanized steel pipes are widely used in various industries such as construction, plumbing, and oil and gas due to their excellent corrosion resistance, durability, and cost-effectiveness. However, to ensure their optimal performance and longevity, several important factors must be taken into account during their usage. This article outlines the key considerations that should be followed when working with galvanized steel pipes.
1. Proper Storage and Handling
The first step to ensure the quality of galvanized steel pipes starts with proper storage and handling. Galvanized pipes should be stored in a dry, well-ventilated area to prevent moisture accumulation, which can lead to white rust formation. White rust, a powdery zinc hydroxide, occurs when the zinc coating is exposed to prolonged damp conditions. To avoid this, pipes should be placed on raised supports (such as wooden or metal racks) at least 15-20 cm above the ground, and covered with a waterproof and breathable tarpaulin if stored outdoors. Additionally, when handling the pipes, avoid dragging or dropping them, as this can damage the galvanized coating. Use lifting equipment with soft slings or padding to protect the surface from scratches and dents, which may compromise the corrosion resistance.
2. Installation Precautions
During installation, several precautions are essential to maintain the integrity of galvanized steel pipes. Firstly, avoid mixing galvanized pipes with non-galvanized metals (such as copper or aluminum) in the same system without proper insulation. This is because when dissimilar metals come into contact in the presence of an electrolyte (like water), galvanic corrosion can occur, accelerating the deterioration of the zinc coating. If mixing is unavoidable, use dielectric unions or insulators to separate the metals.
Secondly, the choice of fittings is crucial. Use galvanized steel fittings that match the pipe size and specification. Threaded connections should be made with care to avoid over-tightening, which can strip the threads or damage the zinc coating at the joint. Apply a suitable thread sealant (such as Teflon tape or pipe dope) that is compatible with galvanized steel; avoid using sealants that contain acids or solvents, as they may corrode the zinc layer.
Thirdly, during cutting and drilling, use sharp tools to ensure clean cuts. Burrs and rough edges should be removed immediately with a file or deburring tool, as they can cause turbulence in the fluid flow and create potential corrosion sites. After cutting, it is recommended to touch up the cut ends with a zinc-rich paint to restore the corrosion protection.
3. Maintenance and Inspection
Regular maintenance and inspection are vital to extend the service life of galvanized steel pipes. Periodically check the pipes for signs of corrosion, such as red rust (which indicates the zinc coating has been worn through and the underlying steel is corroding), white rust, or damage to the coating. Inspect the joints and connections for leaks, as leaking water can accelerate corrosion in the surrounding area.
For cleaning, avoid using abrasive cleaners or tools (such as steel wool or wire brushes) that can scratch the galvanized surface. Instead, use a mild detergent and a soft cloth to wipe away dirt and grime. If white rust is detected in the early stages, it can be removed with a solution of 10% vinegar and water, followed by thorough rinsing and drying. However, if red rust has formed, more extensive repairs may be needed, such as sanding the affected area and applying a zinc-rich primer and topcoat.
4. Compatibility with Fluids and Environments
Galvanized steel pipes are suitable for a wide range of fluids, but their compatibility should be checked based on the specific application. They are commonly used for transporting water (both potable and non-potable), oil, gas, and some chemicals. However, they are not recommended for use with highly acidic or alkaline fluids (pH below 6 or above 12), as these can rapidly corrode the zinc coating. In such cases, alternative materials like stainless steel or plastic pipes should be considered.
Additionally, the operating temperature should be within the acceptable range for galvanized steel. The zinc coating can start to degrade at temperatures above 200°C (392°F), so avoid using galvanized pipes in high-temperature applications without consulting the manufacturer's specifications.
Conclusion
Galvanized steel pipes offer excellent performance when used correctly. By following the key considerations outlined above—proper storage and handling, careful installation, regular maintenance and inspection, and ensuring compatibility with fluids and environments—you can maximize their service life, reduce maintenance costs, and ensure the safety and efficiency of the system. Always refer to the manufacturer's guidelines and industry standards for specific applications to achieve the best results.