Hot Selling Hot Dip Galvanized Pipe Manufacturers

15 chromium molybdenum alloy steel plate 15CrMo hot rolled coil

15CrMo steel is a pearlitic heat-resistant steel with high thermal strength (δb≥440MPa) and oxidation resistance at high temperatures, and has a certain ability to resist hydrogen corrosion. Due to the high content of Cr, C and other alloying elements in the steel, the hardening tendency of the steel is obvious, and the weldability is poor.








Product Name
Standard
Specification




Hot Rolled Coil
15CrMo
2.85*1500*C


Hot Rolled Coil
15CrMo
3.85*1500*C


Hot Rolled Coil
15CrMo
4.85*1500*C


Hot Rolled Coil
15CrMo
5.85*1500*C


Hot Rolled Coil
15CrMo
7.85*1500*C


Hot Rolled Coil
15CrMo
9.85*1500*C


Hot Rolled Coil
15CrMo
11.85*1500*C


Hot Rolled Plate
15CrMo
3*1500*3000


Hot Rolled Plate
15CrMo
3*1500*6000


Hot Rolled Plate
15CrMo
4*1500*3000


Hot Rolled Plate
15CrMo
4*1500*6000


Hot Rolled Plate
15CrMo
5*1500*3000


Hot Rolled Plate
15CrMo
5*1500*6000


Hot Rolled Plate
15CrMo
6*1500*3000


Hot Rolled Plate
15CrMo
6*1500*6000


Hot Rolled Plate
15CrMo
8*1500*3000


Hot Rolled Plate
15CrMo
8*1500*6000


Hot Rolled Plate
15CrMo
10*1500*3000


Hot Rolled Plate
15CrMo
10*1500*6000


Hot Rolled Plate
15CrMo
12*1500*3000


Hot Rolled Plate
15CrMo
12*1500*6000



Chemical Properties






15CrMo has high thermal strength (δb≥440MPa) and oxidation resistance at high temperatures, and has a certain ability to resist hydrogen corrosion. Due to the high content of Cr, C and other alloying elements in the steel, the hardening tendency of the steel is obvious, and the weldability is poor.



15crmo Mechanical properties: Tensile strength: ≥440mpa Yield strength: ≥295mpa Elongation after fracture: ≥22% section shrinkage: ≥60% Impact work: ≥94J



15CrMo is mainly used in internal combustion engine crankshaft, gear, camshaft and important gear reducer parts.

Key Considerations for Using Galvanized Steel Pipes
Galvanized steel pipes are widely used in various industries such as construction, plumbing, and oil and gas due to their excellent corrosion resistance, durability, and cost-effectiveness. However, to ensure their optimal performance and longevity, several important factors must be taken into account during their usage. This article outlines the key considerations that should be followed when working with galvanized steel pipes.
1. Proper Storage and Handling
The first step to ensure the quality of galvanized steel pipes starts with proper storage and handling. Galvanized pipes should be stored in a dry, well-ventilated area to prevent moisture accumulation, which can lead to white rust formation. White rust, a powdery zinc hydroxide, occurs when the zinc coating is exposed to prolonged damp conditions. To avoid this, pipes should be placed on raised supports (such as wooden or metal racks) at least 15-20 cm above the ground, and covered with a waterproof and breathable tarpaulin if stored outdoors. Additionally, when handling the pipes, avoid dragging or dropping them, as this can damage the galvanized coating. Use lifting equipment with soft slings or padding to protect the surface from scratches and dents, which may compromise the corrosion resistance.
2. Installation Precautions
During installation, several precautions are essential to maintain the integrity of galvanized steel pipes. Firstly, avoid mixing galvanized pipes with non-galvanized metals (such as copper or aluminum) in the same system without proper insulation. This is because when dissimilar metals come into contact in the presence of an electrolyte (like water), galvanic corrosion can occur, accelerating the deterioration of the zinc coating. If mixing is unavoidable, use dielectric unions or insulators to separate the metals.
Secondly, the choice of fittings is crucial. Use galvanized steel fittings that match the pipe size and specification. Threaded connections should be made with care to avoid over-tightening, which can strip the threads or damage the zinc coating at the joint. Apply a suitable thread sealant (such as Teflon tape or pipe dope) that is compatible with galvanized steel; avoid using sealants that contain acids or solvents, as they may corrode the zinc layer.
Thirdly, during cutting and drilling, use sharp tools to ensure clean cuts. Burrs and rough edges should be removed immediately with a file or deburring tool, as they can cause turbulence in the fluid flow and create potential corrosion sites. After cutting, it is recommended to touch up the cut ends with a zinc-rich paint to restore the corrosion protection.
3. Maintenance and Inspection
Regular maintenance and inspection are vital to extend the service life of galvanized steel pipes. Periodically check the pipes for signs of corrosion, such as red rust (which indicates the zinc coating has been worn through and the underlying steel is corroding), white rust, or damage to the coating. Inspect the joints and connections for leaks, as leaking water can accelerate corrosion in the surrounding area.
For cleaning, avoid using abrasive cleaners or tools (such as steel wool or wire brushes) that can scratch the galvanized surface. Instead, use a mild detergent and a soft cloth to wipe away dirt and grime. If white rust is detected in the early stages, it can be removed with a solution of 10% vinegar and water, followed by thorough rinsing and drying. However, if red rust has formed, more extensive repairs may be needed, such as sanding the affected area and applying a zinc-rich primer and topcoat.
4. Compatibility with Fluids and Environments
Galvanized steel pipes are suitable for a wide range of fluids, but their compatibility should be checked based on the specific application. They are commonly used for transporting water (both potable and non-potable), oil, gas, and some chemicals. However, they are not recommended for use with highly acidic or alkaline fluids (pH below 6 or above 12), as these can rapidly corrode the zinc coating. In such cases, alternative materials like stainless steel or plastic pipes should be considered.
Additionally, the operating temperature should be within the acceptable range for galvanized steel. The zinc coating can start to degrade at temperatures above 200°C (392°F), so avoid using galvanized pipes in high-temperature applications without consulting the manufacturer's specifications.
Conclusion
Galvanized steel pipes offer excellent performance when used correctly. By following the key considerations outlined above—proper storage and handling, careful installation, regular maintenance and inspection, and ensuring compatibility with fluids and environments—you can maximize their service life, reduce maintenance costs, and ensure the safety and efficiency of the system. Always refer to the manufacturer's guidelines and industry standards for specific applications to achieve the best results.

Unveiling the Wonders of Galvanized Corrugated Sheets: Production and Applications
Introduction
Definition and Basics of Galvanized Corrugated Sheets
A galvanized corrugated sheet is a key construction material made by coating steel sheets with zinc via processes like hot-dip galvanizing. The zinc coating acts as a protective barrier, preventing steel rust and extending lifespan. "Galvanized corrugated sheet" is a vital SEO keyword for this product.
Visually, these sheets have a distinct corrugated pattern with parallel ridges and grooves. This design boosts both aesthetic appeal and structural strength by increasing the sheet's moment of inertia, enabling it to withstand greater loads than flat sheets of the same thickness and material—making it ideal for strength and durability-focused applications.
Significance in the Construction and Other Industries
Galvanized corrugated sheets are pivotal in construction, widely used for roofing due to excellent water-shedding (corrugations direct rainwater away, preventing leakage) and wall cladding, offering cost-effective durability for residential and commercial buildings.
Beyond construction, they’re used in agriculture (barns, sheds, animal shelters) for outdoor corrosion resistance, and in industry (warehouses, factories) for large-scale, durable roofing/wall solutions. Understanding their production and usage is essential for leveraging their benefits.
The Production Process of Galvanized Corrugated Sheets
Raw Material Selection - Steel Sheets and Zinc
Production starts with high-quality low-carbon steel sheets (≤0.25% carbon) for good formability and weldability, easing processing into corrugated shapes. Zinc is chosen as coating for its corrosion resistance—forming a dense zinc-oxide/carbonate film when exposed to air—and sacrificial anode property (corrodes first if scratched, protecting steel). "Zinc-coated steel sheets" is a key SEO keyword.
The Galvanization Process
Hot - Dipped Galvanizing
The most common method, hot-dipped galvanizing, involves four key steps:


Cleaning: Steel sheets are degreased to remove dirt/oil, ensuring proper zinc adhesion—critical for coating quality.


Pickling: Acid (hydrochloric/sulfuric) removes surface oxides/rust, leaving a clean steel surface; controlled to avoid over-pickling damage.


Fluxing: Zinc ammonium chloride/zinc chloride flux prevents re-oxidation and enhances molten zinc wetting for better adhesion.


Hot - Dip Galvanizing: Pre-treated sheets are immersed in 450-460°C molten zinc, forming iron-zinc alloy layers and pure zinc top layer (50-275 microns thick). "Hot-dipped galvanizing process" is a major SEO keyword.


Electro - Galvanizing (Optional Mention)
Electro-galvanizing uses zinc salt electrolytes; electric current deposits zinc (5-15 microns) for a smooth finish. However, it has lower corrosion resistance (no alloy layer) and lower production capacity, making it less suitable for large-scale corrugated sheet production. "Electro-galvanizing" attracts users researching different galvanizing methods.
Corrugation Formation
Post-galvanization, roll-forming machines with profiled rolls shape sheets into corrugations. Ridge/groove distance and depth are adjustable (e.g., for roofing water-shedding). The "corrugation process" boosts strength and appearance, serving as an important manufacturing-related SEO keyword.
Key Features and Benefits of Galvanized Corrugated Sheets
Corrosion Resistance
A top feature, corrosion resistance comes from the zinc sacrificial barrier. In harsh environments (coastal salt air, industrial pollutants), zinc reacts first, preventing steel rust. For example, it withstands coastal conditions for years. "Corrosion resistance" is a high-priority keyword for durable building material searches, ensuring long structure lifespan with minimal rust-related replacements.
High Strength and Durability
Corrugations increase moment of inertia, resisting bending/buckling. Warehouse roofs handle snow loads; agricultural buildings withstand winds/equipment impact. Combined with galvanized coating, this makes sheets durable for demanding uses. "High strength" and "durability" are key keywords for reliable construction material seekers.
Cost - Effectiveness
Galvanized corrugated sheets offer strong cost-effectiveness. Steel is abundant/cost-effective; zinc coating adds minimal cost for extended lifespan (decades vs. years for non-galvanized steel). Low maintenance (no frequent painting) reduces long-term costs. "Cost-effectiveness" is a key keyword for projects from residential renovations to industrial construction.
Wide - Ranging Applications of Galvanized Corrugated Sheets
In Construction
Roofing
Popular for "roofing with galvanized corrugated sheets," corrugations enable efficient water-shedding (critical in heavy rain areas). Lightweight design eases installation, reducing labor/equipment costs, and sheets cut/shaped to fit any roof design. Durable zinc coating ensures decades of low-maintenance use.
Wall Cladding
For wall cladding, sheets blend functionality and aesthetics. The corrugated pattern suits modern/rustic styles, while acting as a barrier against wind/rain/sun. Easy to attach to wood/steel/concrete substrates, making them ideal for new builds and renovations.
In Industrial Settings
In "industrial applications," they build factories, warehouses, and storage facilities. High strength supports heavy loads (equipment, snow, wind), while corrosion resistance withstands industrial pollutants/humidity. Cost-effectiveness makes them smart for large-scale industrial projects.
In Agricultural Buildings
Used in "agricultural buildings" (greenhouses, barns, shelters), corrosion resistance handles moisture (rain, irrigation, greenhouse humidity). Strength resists farmland winds, and cost-effectiveness fits agricultural budget needs, protecting crops/livestock effectively.
In Temporary Structures
For "temporary structures" (movable houses, relief tents, construction sheds), lightweight design eases assembly/disassembly and transportation. Quick to install for immediate shelter, with corrosion resistance handling construction site conditions.
Installation and Maintenance Tips
Installation Guidelines
Proper "installation of galvanized corrugated sheets" ensures performance. Prepare a clean, flat base; use stainless/galvanized screws (30-40cm spacing) without overtightening; apply silicone sealant at joints/overlaps; and overlap roofing sheets 10-15cm for water-shedding/strength.
Maintenance Advice
Regular "maintenance of galvanized corrugated sheets" extends life. Inspect 1-2x yearly (more in harsh weather) for scratches/dents/rust—repair minor scratches with zinc-rich paint. Clean with soft brush/mild detergent (avoid abrasives) to remove debris holding moisture.
Future Trends and Innovations
New Coating Technologies
"New coating technologies" drive innovation. Nano-coatings offer self-healing (micro-particles repair scratches) and better corrosion resistance. Multi-functional coatings add heat-resistance, anti-bacterial, or self-cleaning properties, expanding applications and lifespan for market competitiveness.
Design and Application Expansions
Future designs may use CAD/simulation for optimized corrugation patterns, improving strength-to-weight ratio for demanding projects (e.g., earthquake-prone high-rises). "Future trends" include green building integration (solar panel attachments) and circular economy focus (recycling/reusing for temporary structures), boosting versatility and sustainability.
Conclusion
Recap of Key Points
Galvanized corrugated sheets are made from low-carbon steel and zinc via hot-dipped galvanizing (cleaning, pickling, fluxing, dipping) and roll-forming. They offer corrosion resistance, high strength, cost-effectiveness, with applications in construction, industry, agriculture, and temporary structures. Proper installation/maintenance extends service life.
The Continuing Value of Galvanized Corrugated Sheets
Galvanized corrugated sheets remain essential across industries. With new coatings and expanded designs/applications, they’ll grow more versatile. For construction, industrial, or agricultural projects, their proven performance, cost-effectiveness, and adaptability make them a reliable choice now and in the future.

Steel Market Trends and Outlook: November 11-17, 2025
The Chinese steel market demonstrated a mixed but generally upward trend during the week of November 11-17, 2025, driven by policy stimuli and regional demand variations, while facing challenges from seasonal factors and uneven industry recovery. This article provides a comprehensive analysis of price movements across major steel products and offers insights into the market's short-term outlook.
Price Movements: Regional Divergence and Product Differentiation
Construction steel prices showed significant volatility with an overall upward trajectory. On November 11, the benchmark rebar futures closed at 3,025 yuan/ton, marking a 0.33% daily decline and a 0.62% drop over five days, reflecting initial market caution. However, sentiment shifted dramatically as the week progressed. By November 17, major steel mills implemented successive price hikes: Maanshan Iron & Steel raised its construction steel guidance prices by 50 yuan/ton, with Hefei warehouse-delivered rebar reaching 3,540 yuan/ton and wire rod at 3,760 yuan/ton. Meanwhile, Anhui Yangtze Iron & Steel (Baowu Yangtze) increased螺纹钢, coil rod, and high-speed wire prices by 40 yuan/ton, pushing the listed price of seismic rebar to 3,450 yuan/ton in Hefei.
Regional disparities were pronounced. Southern markets outperformed their northern counterparts due to climate advantages. Guangxi Guixin Iron & Steel implemented three price increases on November 17 alone, totaling 70 yuan/ton, with rebar prices climbing from 3,215 yuan/ton to 3,255 yuan/ton. In contrast, northern regions like Xinjiang entered a seasonal downturn as snowfall disrupted construction activities, leading to accelerated inventory accumulation and increased capital pressure on steel mills.
Industrial steel products faced greater headwinds. Stainless steel round bar prices remained stable with minor declines, as weak raw material costs failed to stimulate demand. The Wenzhou market saw 304 round bar prices range between 12,050-12,150 yuan/ton, while 316L round bars traded at 22,700-22,800 yuan/ton. Scrap steel markets showed modest gains, with the national heavy scrap price index rising 1.27 to 2,062.539 yuan/ton on November 17, indicating gradual cost-side support.
Driving Factors: Policy Boosts vs. Seasonal Constraints
Two major policy developments shaped market dynamics. First, the U.S. Senate's termination of comprehensive tariff policies created potential export opportunities, particularly for cold-rolled sheets and galvanized sheets. Second, China's National Development and Reform Commission announced an additional 200 billion yuan in special bond quotas for infrastructure projects, focusing on transportation, energy, and water conservancy sectors—key drivers of construction steel demand. These measures triggered speculative activity in futures markets, with coking coal and coke futures surging to two-and-a-half-month highs earlier in November.
However, fundamental constraints persisted. The manufacturing PMI remained below the 50-point threshold at 49.0% in October, reflecting weak demand from machinery and home appliance industries. The real estate sector continued its deep adjustment, with construction site steel purchases down over 30% year-on-year. Steel traders reported sluggish inventory turnover and prolonged payment terms, limiting their ability to participate in market rallies.
Market Outlook: Cautious Optimism with Structural Opportunities
The steel market is expected to maintain a "policy-driven but fundamentally constrained" pattern in the near term. Construction steel prices may benefit further from accelerating infrastructure project launches as special bond funds are disbursed. Analysts anticipate continued price hikes from southern steel mills, while northern markets could stabilize as inventories reach seasonal peaks.
Industrial steel faces greater uncertainty. While export-oriented products like cold-rolled sheets may gain from improved U.S.-China trade relations, domestic manufacturing demand is unlikely to recover significantly before year-end. Steel mills are likely to continue optimizing product structures, increasing output of high-value-added products for new energy vehicles and photovoltaic brackets to offset weakness in traditional sectors.
Cost volatility will remain a key watchpoint. Iron ore prices experienced a 4.5% daily drop to 800 yuan/ton earlier in November, while coking coal prices showed resilience. This divergence will pressure steel mills to balance production costs and market prices, potentially leading to selective production cuts among high-cost producers.
In conclusion, the steel market enters the final quarter with cautious optimism. Policy stimuli will provide short-term support, but sustainable recovery requires stronger evidence of demand improvement in manufacturing and real estate. Traders and end-users are advised to adopt flexible strategies, focusing on regional arbitrage opportunities and closely monitoring inventory dynamics.

Galvanized Steel Pipes: The Ultimate Guide to Properties, Applications & Benefits
In the world of construction, plumbing, and industrial infrastructure, choosing the right piping material is crucial for ensuring durability, safety, and cost-effectiveness. Among the众多 options available, galvanized steel pipes stand out as a reliable and versatile choice, trusted by professionals across various industries for decades. This comprehensive guide will delve into what galvanized steel pipes are, their types, key advantages, wide-ranging applications, and why they remain a top pick for projects requiring long-lasting and corrosion-resistant piping solutions.
What Are Galvanized Steel Pipes?
Galvanized steel pipes are carbon steel pipes that have undergone a hot-dip galvanization process—a protective treatment where the steel pipe is dipped into a bath of molten zinc. This process creates a robust zinc coating on the pipe’s surface, which acts as a barrier against rust, corrosion, and environmental damage. Unlike bare steel pipes that are prone to oxidation, the zinc layer sacrificially protects the underlying steel, significantly extending the pipe’s service life. There are also electro-galvanized steel pipes, which use an electrolytic process to apply a thinner zinc coating, often used for less demanding applications where cost is a primary consideration.
Key Advantages of Galvanized Steel Pipes


Exceptional Corrosion Resistance: The zinc coating is the biggest advantage of galvanized steel pipes. It prevents moisture, chemicals, and other corrosive elements from reaching the steel core, making these pipes ideal for both indoor and outdoor use, including harsh environments like coastal areas or industrial facilities.


Long Service Life: When properly installed and maintained, galvanized steel pipes can last 50 years or more. This longevity reduces the need for frequent replacements, lowering long-term maintenance costs for homeowners, businesses, and construction projects.


High Strength & Durability: Galvanized steel retains the inherent strength of carbon steel, making it capable of withstanding high pressure, heavy loads, and extreme temperatures. This makes it suitable for applications like water supply, gas distribution, and structural support.


Cost-Effective: While the initial cost of galvanized steel pipes may be higher than some alternatives (e.g., PVC), their long lifespan and low maintenance requirements make them a cost-effective choice over time. The reduced frequency of repairs and replacements translates to significant savings in the long run.


Easy Installation: Galvanized steel pipes are lightweight compared to other metal pipes (e.g., cast iron) and can be easily cut, threaded, and connected using standard fittings. This simplifies the installation process, saving time and labor costs for contractors.


Common Applications of Galvanized Steel Pipes
The versatility of galvanized steel pipes makes them suitable for a wide range of applications across industries. Here are some of the most common uses:
Construction & Building
In construction, galvanized steel pipes are used for structural frameworks, scaffolding, handrails, and HVAC systems. Their strength and corrosion resistance make them ideal for supporting buildings and ensuring the safety of occupants.
Plumbing & Water Supply
They are widely used in residential, commercial, and industrial plumbing systems for transporting potable water, wastewater, and irrigation water. The corrosion resistance ensures clean water flow without contamination from rust.
Industrial & Manufacturing
In industrial settings, galvanized steel pipes are used for conveying chemicals, oils, and gases. They are also used in machinery, automotive parts, and conveyor systems due to their durability and strength.

Why Choose Galvanized Steel Pipes for Your Next Project?
Whether you’re a homeowner planning a plumbing upgrade, a contractor working on a commercial construction project, or an industrial manager looking for reliable piping, galvanized steel pipes offer unmatched benefits. Their combination of corrosion resistance, strength, longevity, and cost-effectiveness makes them a superior choice compared to alternatives like PVC, copper, or bare steel. When searching for high-quality galvanized steel pipes, look for products that meet industry standards (e.g., ASTM A53) to ensure optimal performance and safety.



Ready to find the perfect galvanized steel pipes for your project? Contact our team of experts today for personalized recommendations, competitive pricing, and fast delivery. We supply a wide range of galvanized steel pipes in various sizes and specifications to meet all your needs.