loading

Henghui Steel have been committed to providing the world with higher quality and lower price Chinese steel.

Hot Dipped Galvanised Coil Sliver by HengHui Steel 1
Hot Dipped Galvanised Coil Sliver by HengHui Steel 2
Hot Dipped Galvanised Coil Sliver by HengHui Steel 3
Hot Dipped Galvanised Coil Sliver by HengHui Steel 1
Hot Dipped Galvanised Coil Sliver by HengHui Steel 2
Hot Dipped Galvanised Coil Sliver by HengHui Steel 3

Hot Dipped Galvanised Coil Sliver by HengHui Steel

Width:
1000mm,1250mm,1500mm
Color:
sliver
Material grade:
SGC,DX51D,DX51D+AZ,DC51D
Delivery time:
20-25days
Shipping term:
FOB/CIF/CFR
Inquiry

Product details of the hot dipped galvanised coil


Product Introduction

HengHui Steel hot dipped galvanised coil shows the outstanding performance, after years of improvement in the production process. The production process is managed in an efficient manner and therefore this product is produced at a quick rate. This product is safe and durable with long service life. Our hot dipped galvanised coil enjoys more advantages especially in its quality.

Galvanized coil, the thin steel plate is dipped into the melted zinc tank, so that its surface adheres to a layer of zinc thin steel plate.  It is mainly produced by continuous galvanizing process, that is, the rolled steel plate is continuously dipped in the plating tank with melted zinc to make galvanized steel plate.  Alloyed galvanized steel sheet.  This steel plate is also made by hot dipping, but immediately after the tank is heated to about 500 ° C, so that it generates an alloy coating of zinc and iron.  This galvanized coil has good coating adhesion and weldability. 

微信图片_20231218162541
微信图片_20231218162541
微信图片_20231218162600
微信图片_20231218162600
微信图片_20231218162654
微信图片_20231218162654
微信图片_20231218162653
微信图片_20231218162653

Production technology

The production process of galvanized coil mainly includes the following steps: steel coil pickling, cleaning, pretreatment, baking, zinc dipping, cooling, coil formation and so on.  

First, the coil pickling.  In this step, the steel coil to be galvanized is put into the acid solution for pickling, in order to remove the oxide, oil and rust on the surface of the steel to ensure the galvanizing effect.  

Then there's the cleaning.  After pickling, harmful substances such as acid and chloride ions will remain on the surface of the steel coil. Rinse with clean water to fully clean the harmful substances.  

The next step is preprocessing.  The cleaned steel coil is put into the pretreatment tank for surface treatment, and a protective film is formed on the steel surface through chemical reaction to increase the binding force between the steel coil and the zinc liquid and improve the quality of the coating.  

Then there's baking.  After pretreatment, there will be a protective film on the surface of the steel coil, which needs to be baked to dry it completely in order to facilitate the subsequent zinc dipping process.  

This is followed by zinc dipping.  The baked steel coil is dipped into the molten zinc solution, and the surface of the steel coil reacts with the zinc solution to form a zinc layer to protect the steel coil from corrosion.  The time and temperature of zinc immersion need to be adjusted according to different needs to achieve the ideal quality of zinc plating.  

And then there's cooling.  After zinc dipping, the steel coil will have a certain temperature, and it is necessary to cool it to make the zinc layer on the surface of the steel coil quickly solidify and ensure the quality of the coating.  


Finally, it's a roll.  After cooling, the galvanized steel coil is rewound and the quality is checked.  The quality test mainly includes the checking of coating thickness, coating adhesion, coating uniformity and so on. 

These are the main steps of the galvanized coil production process, each step is very critical. It plays an important role in the quality of the final galvanized coil and at the same time in the production process,It is also necessary to pay attention to issues such as environmental protection and production safety to ensure the stable progress of the process 


微信图片_20231218162620
微信图片_20231218162620
微信图片_202312181626001
微信图片_202312181626001
微信图片_20240104143851
微信图片_20240104143851

Advantages of galvanized steel coil 

1. Strong corrosion resistance: the zinc layer on the surface of the galvanized coil has good corrosion resistance, which can effectively resist wind and rain, acid rain erosion and other external factors.  

 

2. Long life: galvanized coil after galvanized treatment, its life can be more than twice as long as the untreated steel, greatly improving the service life of steel.  

 

3. High safety: galvanized coil not only has good corrosion resistance and aesthetics, but also has good flame retardant performance, making it widely used in the construction field.  

 4. Good environmental protection: galvanized coil in the production process, will produce a certain amount of waste gas, waste water and waste slag, but after modern technology treatment, can meet environmental standards, no pollution to the environment. 

Use of galvanized coil

The uses of galvanized rolls are as follows: A large number of galvanized thin rolls are used in automotive manufacturing, refrigerated containers, construction, ventilation and heating facilities, and furniture manufacturing.  Galvanizing has become an important method of steel corrosion protection, not only because zinc can form a dense protective layer on the surface of the steel, but also because zinc has a cathodic protection effect, when the galvanizing layer is damaged, it can still prevent the corrosion of the iron base material by cathodic protection.  Construction industry: roof, roof components, balcony rolls, window sills, newsstands, warehouses, rolling doors, heaters, rainwater pipes and other household appliances: refrigerators, washing machines, switch cabinets, air conditioners, microwave ovens, bread makers, copiers, vending machines, electric fans, vacuum cleaners and other furniture industry:  Lampshade, wardrobe, table, bookshelf, counter, signboard, medical equipment and other transportation industry: automobile sky roll, car shell, carriage roll, tractor, tram, container, highway wall, ship bulkhead roll and other aspects:  Musical instrument shell, dustbin, billboard, clock, photographic equipment, meter and other color coated steel coil is hot galvanized coil, hot plated aluminum zinc coil, electric galvanized coil and so on as the base coil, after surface pretreatment.  Of course,when making galvanized rolls, it must first be passivated to be able to carry out the second step of oiling, and finally paint sealing and phosphating.  The galvanized roll produced after a long step is very durable, of course, if the user does not need phosphating, this step can be omitted in the production  process.

2 (7)
2 (7)

FAQ

1
Are you a factory or trading company? 
We are a factory.
2
Where is your factory located? How can I visit there? 
We locate in Tianjin, China, 30 minutes from Beijing by train.
3
Can I get some samples? 
Yes, free samples can be provided
4
What do your factory do regarding quality control? 
From material to products, we inspect each process to keep good quality.
5
How about MOQ? 
We have stock of common sizes at hand, so one ton is accepted.
6
How about payment? 
Both T/T and L/C can be accepted.
7
How long does your warranty? 
We can assure the quality within 90 days of receiving the cargo.


Company Advantage

• HengHui Steel was established in Over the years, we have constantly advocated innovation and successfully launched our brand. By doing so, we can enhance our comprehensive competitiveness.
• Multiple traffic lines gather in HengHui Steel's location. This provides advantages for traffic and helps achieve the efficient distribution of various products.
• With the timely and efficient service concept, our company sincerely provides quality services for our clients.
• With a focus on talents, our company has created an experienced talents team. They have comprehensive strength and high technical level.
For customization, please contact HengHui Steel and provide relevant information. We will give you the quotation as soon as possible.

Contact us
we welcome custom designs and ideas and is able to cater to the specific requirements. for more information, please visit the website or contact us directly with questions or inquiries.
no data

Leave A Message

get in touch with us

We can do and agent various of products importing and exporting business, our company establish good trade relations with Brazil, India, South Africa, the Middle East and Southeast Asian market and we has build a solid global economic structure, we have won the client's reliance and appreciated by strong production capacity and meticulous customer service.
no data

Contact Us

Contact Person: Toby

Phone: 0086 187 2258 3666

E-mail: toby@henghuisteel.com

WhatsApp: 0086 185 2672 0784

Add: Daqiuzhuang Industrial Park, Jinghai District, Tianjin

Copyright © 2025 Tianjin HengHui Steel Group Co., Ltd. -www.henghuisteel.com | Sitemap | Privacy Policy 
Contact us
whatsapp
contact customer service
Contact us
whatsapp
cancel
Customer service
detect