12 foot scaffolding construction frame scaffolding -h-frame set frame

Menene scafolding frame?

Frame scaffold yana ɗaya daga cikin ɓangarorin da aka fi amfani da su a cikin ɓangarorin gini  Domin babban firam ɗin font ɗin “ƙofa” ne, ana kiransa portal ko ɓangarorin ƙofa, wanda kuma aka sani da firam ɗin mikiya ko firam ɗin gantry.   Wannan nau'in ɓangarorin ya ƙunshi babban firam, firam ɗin giciye, goyan bayan giciye, farantin ƙafa, tushe mai daidaitacce da sauransu.

Abun asali

Portal scaffold shine madaidaitan bututun ƙarfe wanda ya ƙunshi firam ɗin portal, goyan bayan giciye, sandar haɗi, farantin ƙafar nau'in ƙugiya ko firam ɗin kwance, hannun kulle hannu, da sauransu, sannan saita sandar ƙarfafa ta kwance, takalmin gyaran kafa, sandar share fage, sandar rufewa. , sashi da tushe, kuma an haɗa bangon zuwa babban tsarin ginin  Ba za a iya amfani da sikelin karfe na Portal ba kawai azaman ƙwanƙwasa na waje ba, har ma a matsayin ƙwanƙwasa na ciki ko cikakken ɗakin. 

Yadda ake gina ɓangarorin portal da ma'ajiyar ɓarna na gaba

(1) Ginshikin tsumma  

1) Tsarin ginin tashar portal scaffold shine kamar haka: Shirye-shiryen tushe → Sanya farantin kushin → Sanya tushe → Gyara guda biyu na firam guda ɗaya → shigar da sandar giciye → shigar farantin ƙafa → Maimaita shigar da firam ɗin portal, giciye. sanda da farantin ƙafa a kan wannan  

2) Dole ne a tunkare harsashin ginin, sannan a dasa wani yanki mai kauri mai kauri 100mm, sannan a yi gangaren magudanar ruwa don hana ruwa.  

3) Sai a kafa tarkacen bututun ƙarfe na portal daga wannan ƙarshen zuwa wancan ƙarshen, sannan a kafa na sama bayan na gaba.  Saita alkibla kishiyar mataki na gaba  

4) Gyaran ɓangarorin portal, da farko yakamata a saka firam biyu akan ƙarshen tushe, sannan a sanya sandar giciye da aka gyara, kulle gunkin kulle, sannan saita firam ɗin ƙofar gaba, kowanne ya ɗauki fil, sannan a sanya sandar giciye. da kulle yanki  

5) The m gefen portal karfe bututu scaffold ya kamata a saita da almakashi, kuma duka a tsaye da kuma a tsaye ya kamata a saita ci gaba.  

6) Dole ne a saita kullun tare da haɗin gwiwa mai dogara ga ginin, kuma nisa tsakanin sassan haɗin ba zai zama fiye da matakai 3 a kwance ba, kuma nisa na tsaye ba zai zama mafi girma fiye da matakan 3 ba (lokacin da tsayin daka ya kasance. <20m) da matakai 2 (lokacin da tsayin dattin ya kasance >20m)  

(2) Rugujewar tarkace  

1) Shirye-shirye kafin tarwatsa ɓangarorin: duba cikakken bincike, mai da hankali kan bincika ko an haɗa na'urori da gyarawa, kuma tsarin tallafi ya cika ka'idodin aminci;  Shirya shirin rushewa bisa ga sakamakon dubawa da yanayin wurin kuma samun amincewar sassan da suka dace;  Bayyanar fasaha;  Dangane da yanayin wurin da aka rushe, kafa shinge ko alamun gargadi, kuma a sami masu gadi na musamman;  Cire kayan, wayoyi da sauran tarkace da aka bari a cikin tarkace  

2) Wurin aiki inda aka cire shiryayye an haramta shi sosai don waɗanda ba masu aiki ba su shiga  

3) Kafin a wargaza firam ɗin, ya kamata a samar da hanyoyin amincewa ga mai kula da ginin, kuma dole ne a ba da umarni na musamman lokacin da za a wargaza firam ɗin, don a daidaita amsawar sama da ƙasa da aikin.  

4) Dole ne tsarin cirewa ya zama na farko don cire sassan da aka sanya bayan na farko don cire sassan, an hana yin amfani da tsarin rushewa na turawa ko ja da ƙasa.  

5) Ya kamata a cire sassan da aka gyara tare da Layer Layer ta Layer. Lokacin da aka cire mai tashi na ƙarshe, yakamata a saita goyan bayan ɗan lokaci kafin a iya cire ƙayyadaddun sassa da sassa masu goyan baya  

6) Ya kamata a kwashe sassan da aka tarwatsa su zuwa kasa cikin lokaci, kuma an hana su jefa su daga iska.  

7) Ya kamata a tsaftace sassan da aka yi jigilar da aka kai zuwa ƙasa kuma a kiyaye su cikin lokaci  Aiwatar da fentin anti-tsatsa gwargwadon buƙata, kuma adana bisa ga iri-iri da ƙayyadaddun bayanai 

Yanayin aikace-aikace na firam scaffolding

1. Ana amfani da shi don gini, zauren, gada, viaduct, rami da sauran kayan aikin don tallafawa rufin ko a matsayin babban firam don goyan bayan ƙura.

2. Don manyan gine-gine a ciki da waje grid scaffolding.

3. Dandali mai aiki mai aiki don shigarwa na inji da na lantarki, gyaran hulu da sauran ayyukan gyare-gyare.

4. Za'a iya amfani da sikelin mashigin ruwa tare da katako mai sauƙi don samar da wurin kwana na wucin gadi, sito ko zubar.

5. An yi amfani dashi don saita dandamalin kallo na ɗan lokaci da tsayawa

Ƙayyadaddun kayan mu

Lokacin isar da samfur